Design and Components of Stub Setting Props
The stub setting prop assembly follows the supplied technical drawing, which specifies an NB40 pipe, square base plates and stiffener plates. Each component must match the approved project drawing and manufacturing
requirements.
NB40 Pipe
The supplied drawing specifies an NB40 pipe with a wall thickness of 3.2 mm and a listed length of 490 mm. The drawing identifies YST 240 to IS 1161 as the pipe material specification.
Square Base Plates
The drawing shows a 125 × 125 × 5 mm base plate with four Ø13 mm holes. The plate material is specified as Grade A to IS 2062.
Stiffener Plates
The drawing specifies 30 × 30 × 5 mm stiffener plates. These form part of the illustrated assembly. Their final placement and welding details must follow the approved drawing.
Applications of Stub Setting Props
Stub setting props are associated with transmission tower foundation work, particularly the positioning of tower stubs before foundation
concrete placement.
- Transmission line tower foundation construction.
- Tower stub positioning and setting operations.
- Electrical transmission infrastructure projects.
- Foundation work carried out according to approved tower drawings.
The suitability of this specific design for a project must be confirmed by the responsible project engineer.
Material and Manufacturing Requirements
The supplied drawing identifies these material specifications:
- Pipe: YST 240 as per IS 1161.
- Plates: Grade A as per IS 2062.
AMCO Exports can review the customer’s approved drawing and manufacturing requirements to determine whether the specified component can be produced as requested. Confirm material certificates, inspection requirements,
welding procedures, dimensional tolerances and surface finish before order confirmation.
Explore our related formwork accessories and scaffolding and formwork products for other construction project requirements.
Stub Setting Props Manufacturer and Supplier in India
AMCO Exports supplies scaffolding and formwork products and can review enquiries for drawing-based steel components. Buyers can share their technical drawings and project requirements for a manufacturing
feasibility review.
Information Required for a Quotation
- Approved technical drawing and revision number.
- Required quantity.
- Project specifications and material requirements.
- Required finish and inspection documents.
- Delivery location and expected delivery schedule.
Providing these details helps establish the manufacturing scope and quotation requirements.
Stub Setting Props Price
The price of a stub setting prop depends on the approved design, material requirements, fabrication scope, order quantity, finishing requirements and delivery terms.
Contact AMCO Exports for a quotation based on your drawing and project requirements. The unit price and minimum order quantity for this product have not yet been confirmed.
Frequently Asked Questions About Stub Setting Props
What are stub setting props used for?
Stub setting props are used in transmission tower foundation work to assist with positioning and holding tower stubs during setting operations, according to the approved project procedure.
What pipe is specified in the supplied drawing?
The drawing lists an NB40 pipe with a 3.2 mm wall thickness and a length of 490 mm. It identifies YST 240 as per IS 1161.
What are the base plate dimensions?
The drawing specifies a 125 × 125 × 5 mm base plate with four Ø13 mm holes.
Which material grade is specified for the plates?
The drawing identifies Grade A as per IS 2062 for the plates.
What is the load capacity of this stub setting prop?
The supplied drawing does not state a load capacity. Obtain the approved design and engineering confirmation before assigning a rated capacity or using the component on site.
Can AMCO Exports quote against a customer drawing?
Share your approved drawing, required quantity, material specifications and delivery details with AMCO Exports for a manufacturing feasibility review and quotation.
Request a Quotation for Stub Setting Props
Looking for stub setting props for a transmission line tower project? Send AMCO Exports your approved drawing and quantity requirements for review.
AMCO Exports
Call/WhatsApp:
+91 98888 82322
Email:
amcosales1@gmail.com
Website:
www.amcoexports.com
